01
Richmond
Flat, sea-level, and wind-exposed — an island in the Fraser delta that asks a lot of a roof.
In the neighborhood
Roofing in Richmond.
Richmond sits at sea level on an island in the mouth of the Fraser, and that shapes every roof on it: wind off the strait, a high water table, and a lot of flat and low-slope architecture. Innovation Roofing specs for the exposure — wind-rated fastening, torch-on done properly on the flat sections, and coastal-grade metal where a Steveston or Seafair home takes the weather off the water. Every project overseen by a named project manager, with the documentation to prove it.
Neighborhoods
- Steveston
- Brighouse
- Terra Nova
- Seafair
- Broadmoor
- Hamilton
Coordinates
49.16°N · 123.13°W
Local intel
What Innovation Roofing Knows About Roofs in Richmond.
Richmond is flat and low — most of the island sits at or near sea level in the Fraser delta — and it's open to the wind coming off the Strait of Georgia, especially in the western neighbourhoods like Steveston, Seafair, and Terra Nova. That wind exposure means perimeter fastening and edge-metal detail carry more of the load than on a sheltered inland roof, and it's where previous installs most often let go. A large share of Richmond's housing and its flat-roofed additions want two-ply SBS torch-on, every seam heat-welded twice and the parapet wrapped, because a single-torched flat roof in this wind and rain starts leaking at the seams within a few years. The coastal air out toward Steveston carries salt, so coated fasteners and Kynar-500 metal finishes protect both the roof and the warranty on exposed elevations. The newer builds across Brighouse and Broadmoor lean modern, with metal and flat-membrane roofs. Every install is completed by a WorkSafeBC registered crew carrying $5M commercial general liability, backed by a written 10-year workmanship warranty and lifetime materials coverage..
Best for
Roof Systems Suited to Richmond.
Recent work
Recent Projects in Richmond.
Fresh route
The first Richmond project on record could be yours — documented, warranted, and installed by a named project manager.
Frequently asked
What Richmond Homeowners Ask Before They Sign.
Because it's flat, low, and open to the strait. The wind gets under a roof that wasn't nailed to the right pattern, especially out toward Steveston and Seafair. We step up the perimeter fastening and the edge metal so the wind can't lift it. It's the most common failure we're called to fix here.
Two-ply SBS torch-on: base sheet fastened, cap sheet fully torched, every seam welded twice, parapet wrapped in metal. In Richmond's wind and rain a single-torched flat roof starts leaking at the seams within a few years, so we don't cut that corner.
On exposed steel, yes. We use coated fasteners and a Kynar-500 finish on any metal facing the water, which is what stands up to the salt air and holds the colour warranty. Inland Richmond homes don't need the same step-up.
Richmond · BC
Book Your Free Richmond Inspection.
A named project manager — not a call centre — will assess the roof, photograph every problem area, and return a written proposal within one business day. WorkSafeBC registered, $5M commercial general liability, and a written warranty on every project.
Or call (778) 814-8397
Licensed BC contractor · WorkSafeBC registered · $5M liability · Written warranty on every project